1. Technical parameters:

• Cutting thickness: 0.1-5mm;
• Effective size of cutting glass: ≤800*600mm;
• Overall dimensions: about 1570 (L) * 1540 (W) * 1600 (H) mm (excluding control box);
• Table height: 900±50mm;
• Machine weight: about 1200kg;
• Straight line marking tolerance: ±0.03-±0.05mm;
• Special-shaped marking tolerance: ±0.08-±0.1mm;
• Cutting speed: 0-60m/min (adjustable);
• Beam processing accuracy: ±0.015mm;
• Marble table flatness: ±0.15mm;
• Power: 3.7kw;
• Voltage: 3-phase 380V;
• Unit area mass: ≤500KG/㎡.

2. Main configuration:

• Transmission system: X and Y axes use Taiwan Hiwin linear motors; Z and A axes use Yaskawa servo motors (4 axes);
• Mechanical configuration: Guide rails and sliders are Taiwan Hiwin;
• Cutting table: marble precision table, including air flotation device;
• Oil supply method: automatic oiling;
• Positioning device: mechanical positioning (custom positioning block);
• Bearing: Japan NSK;
• Cutter head structure: servo motor control module;
• Synchronous belt: Gates;
• Blowing and suction device: Lion song aerator;
• The cutting machine body and control box adopt a separate design, and the body is supported by 4 foot cups; the control box is supported by 4 universal wheels, which can move 360° freely, and it is convenient to adjust the position. After determining the position, the universal wheel can be locked and will not deviate at will.

3.CCD parameters:

• CCD field of view: 10mm*11mm;
• CCD pixels: 5 million pixels;
• Controller: PC;
• Magnification: 40-60 times;
• Camera accuracy: 0.006mm;
• Effective target size: + cursor ￠0.3-1.6mm; circular cursor ￠0.3-1.0mm; special targets need to be tested;
• X-axis static repeat positioning accuracy: ≤0.03mm;
• Y-axis static repeat positioning accuracy: ≤0.03mm;
• Angular deviation: ≤0.2°;
• Working positioning:
• (1) Positioning method: mechanical positioning, vacuum adsorption;
• (2) Positioning pin position: upper left corner.

Previous Next