1. Equipment parameters:

(1) Cutting thickness: 0.4-8mm;
(2) Cutting speed: 0-60m/min (adjustable);
(3) Table height: 910±20mm;
(4) Maximum original sheet size that can be cut: 2550*2000mm, minimum original sheet size: 500*500mm;
(5) Minimum size that can be cut: 10*10mm;
(6) Power: 5.5KW;
(7) Gas consumption: 1.5L/min;
(8) Cutting knife seat: The knife head rotates 360°, and can cut up and down, and can cut any shape of glass;
(9) Oil supply method: automatic oil filling device. Oil pressure can be adjusted in a fool-proof manner;
(10) Personnel requirements: basic knowledge of glass cutting and simple computer operation.

2. Cutting parameters:

(1) Diagonal accuracy: ≤±0.2mm/m (the above accuracy is based on the cutting line accuracy before breaking);
(2) Cutting bridge acceleration: ≥3.0m/s²;
(3) Cutter head frame speed: ≥160m/min;
(4) Cutter head frame acceleration: ≥6.0m/s²;
(5) Belt transmission speed: ≥40m/min;
(6) Cutting head positioning accuracy error: ≤±0.15mm;
(7) Linear cutting speed: ±0.05mm;
(8) Special-shaped cutting accuracy: ±0.2mm.

3. Mechanical part:

(1) Main bearings: Japan NSK;
(2) Conveyor belt/pulley: Italy Barberi;
(3) Table: cast iron table, annealed;
(4) Transmission motor: Taiwan Delta;
(5) Screw/guide rail: Taiwan Hiwin;
(6) Knife wheel/knife clamp: Yinrui Customized;
(7) Table: Korean imported industrial felt (gray);
(8) Knife holder: pneumatic control;
(9) Conveying device: with automatic induction transmission device (three synchronous belts for automatic transmission and two proximity switch induction, to achieve automatic induction and automatic transmission, reducing the workload of personnel).

4. Electrical parts:

(1) Air switch: Taiwan Taian (with leakage protection function);
(2) AC contactor: Taiwan Taian;
(3) Buttons, indicator lights, selector switches: Japan Izumi;
(4) Switching power supply: Japan Omron;
(5) Relay: Japan Omron;
(6) Proportional valve: Japan SMC;
(7) Filter, solenoid valve: Japan SMC;
(8) Computer: Asus.

Previous Next